EXPERIENCE STOREHOUSE LLC
HIGH QUALITY FUEL DRAIN VALVES
SINCE 1999
We believe in creating the best products for the best companies out there. And we don’t imagine our standards will drop anytime soon. We’re committed to designing, crafting and assembling the best aviation fuel system components on the market and we have been doing so since 1999.
ABOUT OUR VALVES
Top Quality, Guaranteed
FDV-2
Hose Clamp Valves
STC & TSO Certified
Available in Beech, Cessna, and Piper fuel drain valve kits. (See Valve Kits)
Cleaner look with a low profile and stainless steel construction on the bottom of the wing.
Easier maintenance, once installed, you can drain the cell, clean the valve, or change the o-ring without removing the valve.
Durable stainless steel construction
Recommended by owners groups and IA's
FDV-4 SERIES
Threaded Valves
TSO C76b Certified
Replaceable o-rings
NPT & NF3 threading
All Stainless steel
Pin actuated
Currently only available in 1/8-27 NPT, other thread sizes available soon.
VALVE KITS FOR FUEL CELLS
All our Beechcraft, Cessna, and Piper kits are STC & TSO certified and include:
Fuel drain valve + All hardware for installation & instructions +
Supplemental Type Certificate + STC Approval Statement
Beech and Cessna kits include 2 valve and hardware sets, while Piper kits have 1 set.
KIT 720B - BEECH
FDV-2
Available for Beechcraft 33's thru 300's
Recommended by owners groups & IA's
Improved Sumping
This installation holds the fuel cell sump area flat in the cavity allowing for a more thorough sump.
Cleaner Look
Rubber and stainless steel washers cover the opening in the bottom of the wing.
Protection
Protects the fragile runner drain nipple from weather and wear & tear.
Easier Maintenance
Once installed, you can drain the cell, clean the valve, or change the o-ring without removing the valve.
720CM KIT - CESSNA MOD
FDV-2
Available for Cessna 180's thru 210's
Recommended by owners groups & IA's
Third the cost of Cessna parts!
Better Protection than Cessna Mod Kit
Installation holds the fuel cell in its original position avoiding wrinkles and damage to the fuel cell & drain.
Cleaner Look
Low profile provides a clean look to the bottom of the wing.
STC & TSO Certified
These kits are FAA approved as an alternate means of compliance for AD84-10-01R1.
Easier Maintenance
Once installed, you can drain the cell, clean the valve, or change the o-ring without removing the valve.
720C KIT - CESSNA STD
FDV-2
Available for Cessna 180's thru 210's
Recommended by owners groups & IA's
Third the cost of Cessna parts!
Cleaner Look
Low profile provides a clean look to the bottom of the wing.
STC & TSO Certified
These kits are FAA approved as an alternate means of compliance for AD84-10-01R1.
Easier Maintenance
Once installed, you can drain the cell, clean the valve, or change the o-ring without removing the valve.
720P KIT - PIPER PA-23
FDV-2
Available for Piper PA-23 Series
Recommended by owners groups & IA's
Improved Sumping
This installation allows you to sump where the water collects... the inboard aft corner of each fuel cell.
Cleaner Look
The low profile and stainless steel construction provides a clean look to the bottom of the wing.
STC & TSO Certified
STC SA01237AT TSO-C76b Approved
Easier Maintenance
Once installed, you can drain the cell, clean the valve, or change the o-ring without removing the valve.
Unlike our Beech and Cessna valve kits, the Piper kit P/N 720P is sold with one valve and hardware set for installation on an individual fuel cell.
1/8" NPT
FDV-4
Specifications
P/N FDV4-P1S 1/8-27 NPT threading
9/16" Hex valve body is socket ready
Made with Viton o-rings for durability
Replaces OEM P/N CCA-1550
Compliments FDV-2 & 3 bladder valves
